Victoria Arduino VA358 User Handbook Manual page 57

NOTE: This counter does not count the dis-
bursements of water used for the wash-
ing cycles.
TOTAL COUNT:
• The display shows:
Fri/09/09 14:45
GROUP 1
GROUP 2
GROUP TOTAL
MACH.GRAND TOT.
1.21 bar
• Press the RESET button to exit of visualization.
WASHING COUNT:
• The display shows:
Fri/09/09 14:45
WASHING 1
WASHING 2
1.21 bar
• Press the RESET button to exit of visualization.
5.2.7 Faults history
With the ▲ ▼ buttons to select "FAULTS
HISTORY" and press ENTER to access:
► FAULTS HISTORY
TECHNICAL SETTINGS
156
146
301 1.21 bar
301
Select the desired item using the ▲ ▼ keys
and press ENTER to access.
► FAULTS HISTORY
WASHING ALARM
13
9
1.21 bar
FAULTS HISTORY:
• This function allows you to view the fault
history of the unit.
ALL TEMP MAX CALD 2
ERROR 01
1.21 bar
Using the ▲ ▼ keys you can browse through
the alarm list.
NOTE: are shown the last 10 alarms.
To clear the alarm log, simply press and hold for
a few seconds the RESET button.
Fri/09/09 14:45
To exit, press the RESET button.
WASHING ALARM:
This function serves to set the timer (hours and
minutes) for the group wash alarm.
E.g. setting 1 h and 30 min., will cause the
machine to send a wash alarm message after
1h and 30 min.
It is possible to access this function pressing
ENTER.
Using the ▲ ▼ buttons you can select among
the options and ACTIVE NOT ACTIVE.
Fri/09/09 14:45
WASHING ALARM
HH: 09
1.21 bar
Selecting the ACTIVE state then ENTER leads
to the selection of alarm time purging.
Fri/09/09 14:45
Using the ▲ ▼ keys you can browse through
the alarm list.
Fri/09/09 14:45
MM: 00
57