Table of Contents
Advertisement
Assembling the burner parts
After cleaning the burner, place the
parts as shown below.
1 Burner cap
2 Burner head
3 Burner chamber
4 Spark plug (in products with igniter)
1. Place the burner head ensuring that it
passes through the burner spark plug
(4). Turn the burner head right and left
24/EN
to make sure that it is seated in the
burner chamber.
2. Place the burner cap on the burner
head.
Cleaning the control panel
Clean the control panel and knobs with
a damp cloth and wipe them dry.
If your product is equipped with
buttons/knobs do not remove the
control buttons/knobs to clean
the control panel.
Control panel may get damaged!
1 Knob
2 Sealing element
Do not remove the sealing
elements under the knobs for
cleaning.
Advertisement
Table of Contents
