Table of Contents
Advertisement
descaling agent, with a descaling
agent such as vinegar or lemon juice.
• lf the surface is heavily soiled, apply
the cleaning agent on the stain with a
sponge and wait a long time for it to
work properly. Toen clean the glass
surface with a wet cloth.
• Discolorations and stains on the glass
surface are normal and not defects.
Plastic parts and painted surfaces
• Clean plastic parts and painted
surfaces using dishwashing detergent,
warm water and a soft cloth or
spon ge and dry them with a dry cloth.
• Do not use hard metal scrapers and
abrasive cleaners. lt may damage the
surfaces.
• Ensure that the joints of the
components of the appliance are not
left as damp and with detergent.
Otherwise, corrosion may occur on
these joints.
Cleaning the hob
Glass cooking surface
Follow the cleaning steps described for
the glass surfaces in the "General
cleaning information" section for the
cleaning of glass cooking surface. You
may complete your cleaning as per the
information below for special cases.
• Sugar-based foods such as dark
cream, starch and syrup should be
cleaned immediately, without waiting
for the surface to cool. Otherwise, the
glass cooking surface may be
permanently damaged.
• Do not use cleaning agents for
cleaning operations you perform while
the hob is hot, otherwise permanent
stains may occur.
Cleaning the control panel
• When cleaning the panels with knob
control, wipe the panel and knobss
with a damp soft cloth and dry with a
dry cloth. Do not remove the knobs
and gaskets underneath to clean the
control panel. The con trol panel and
knobs may be damaged.
• While cleaning the inox panels with
knob control, do not use inox cleaning
agents around the knobs. The
indicators around the knobs may be
deleted.
• Clean the touch control panels with a
damp soft cloth and dry with a dry
cloth. lf your product has a key loek
feature, set the key loek before
performing control panel cleaning.
Otherwise, incorrect detection may
occur on the keys.
29/EN
Advertisement
Table of Contents
