Cleaning The Control Panel - Beko BCT90GX1 User Manual

6 Maintenance and care
6.2.4 Glass surfaces
Wipe the glass ceramic surface using a piece of
cloth dampened with cold water in a manner as
not to leave any cleaning agent on it. Dry with a
soft and dry cloth. Residues may cause damage on
the glass ceramic surface when using the cooktop
for the next time.
Dried residues on the glass ceramic surface should
under no circumstances be scraped with hook
blades, steel wool or similar tools.
Remove calcium stains (yellow stains) by a small
amount of lime remover such as vinegar or lemon
juice. You can also use suitable commercially avail-
able products.
If the surface is heavily soiled, apply the cleaning
agent on a sponge and wait until it is absorbed
well. Then, clean the surface of the cooktop with
a damp cloth
Sugar-based foods such as thick
cream and syrup must be cleaned
C
promptly without waiting the sur-
face to cool down. Otherwise, glass
ceramic surface may be damaged
permanently.
Slight color fading may occur on coatings or other
surfaces in time. This will not affect operation of
the product.
Color fading and stains on the glass ceramic sur-
face is a normal condition, and not a defect.
Built-In Hob / User Manual

6.3 Cleaning the control panel

Clean the control panel and knobs with a damp
cloth and wipe them dry.
C
Do not remove the control buttons/
knobs to clean the control panel.
Control panel may get damaged!
1. Knob
2. Sealing element
C
Do not remove the sealing elements
under the knobs for cleaning.
25 / EN