AJAX DoubleButton User Manual page 6

Parameter
First field
Room
LED brightness
Alert with a siren if button is pressed
User Guide
Temporary Deactivation
Unpair Device
A DoubleButton alarm generates an event notification sent to the security
Value
Device name. Displayed in the list of all hub
devices, SMS, and notifications in the event
feed.
The name can contain up to 12 Cyrillic
characters or up to 24 Latin characters
Selecting the virtual room to which
DoubleButton is assigned. The name of the
room is displayed in SMS and notifications in
the event feed
Adjusting LED brightness:
Off — no indication
Low
Max
When enabled, the
security system signal about the button
pressing
Opens the DoubleButton user manual
Allows the user to disable the device without
removing it from the system. A temporarily
deactivated device will not raise an alarm when
pressed
Disconnects DoubleButton from a hub and
removes its settings
connected to your