AJAX DoubleButton User Manual page 3

DoubleButton can only operate as a hold-up device. Setting the type of alarm is
not supported. Keep in mind that the device is active 24/7, so pressing the
DoubleButton will raise an alarm regardless of the security mode.
Only
is not supported.
The Ajax security system can connect to the CMS and transmit alarms to the
monitoring station in
The device is not compatible with
control panels.
1. Install the
least one room.
2. Check if your hub is on and connected to the Internet (via Ethernet cable, Wi-
Fi, and/or mobile network). You can do this in the Ajax app or by looking at
the Ajax logo on the front panel of the hub. The logo should light with white
or green if the hub is connected to the network.
3. Check if the hub is not armed and does not update by reviewing its status in
the app.
Only users with administrator permissions can connect a device to a hub.
are available for DoubleButton. The control mode for
. Create an
and protocol formats.
, , and third party security
. Add a hub to the app and create at