⚫ Actuator Run / Stop control
Please note that the options for Run / Stop control of the actuators are offered
differently according to the type of the active part and its attribute, i.e. Switches:
ON/OFF, Volume control: Increase / Decrease, Function: Execute / Unexecuted.
Please check the buttons on the right of the screen to comprehend how the test
function runs and how to stop it before starting the actuation test.
Example A: [Injection Quantity] is selected where injection time control applies.
Example B: [VVT Control] is selected where the function execution control applies
⚫ Different Items Supported
Not all active parts of a control system are supported for this function.
The list of the active parts available for the actuation test is predefined by the
automakers, therefore different items are supported according to the brands and
models.
User Manual ver.1.03
80