Consecutive Record; Selected Items Record - Zenith Z5 User Manual

➢ CONSECUTIVE RECORD

Starts recording multiple frames and continues until stopped by the user. The
record time and number of samples (frames) are indicated in the top of the screen.
- Select "Trigger" to mark the important or critical moment, which is going to be
indicated when reviewing the data.
- Select "Close" to stop recording the data and select "OK" to end, then the data
is saved as the Flight Record Data in the Z5 internal memory.

➢ SELECTED ITEMS RECORD

This option is available only when data list or graphs are being displayed in [SELECT
ITEM] mode that shows just the data readings of the selected parameters.
Unlike Consecutive Record that starts recoding when selected, Z5 stops recording
immediately and saves the data that has been previously recorded in its temporary
memory to a file when you choose [SAVE SELECTED PARAMETERS RECORD].
User Manual ver.1.03
77