It will be noticeable that the status of the Pre-repair Scan Result is changed from "Not
Saved" to data and time when the Result was saved. Also [ADD] button has been
changed to [Overwrite].
If you want to delete the previously saved Pre-repair Scan Result and replace it with a
new result, you can do so by repeating the System Search as explained above and
selecting [Overwrite] button.
⚫ Post-repair Scan
Repair the vehicle as necessary and repeat System Search or DTC Analysis procedure
as explained above when repair and service are completed.
Select the report to which you want to add the Post-scan result among the list of the
diagnostic reports. Then select [ADD] button in the Post-Repair Result slot.
The status of the Pre-repair Scan Result changes from "Not Saved" to data and time
when the Result was saved. Also [ADD] button changes to [Overwrite].
You can delete the previously saved Post-repair Scan Result and replace it with a new
result by selecting [Overwrite] button.
User Manual ver.1.03
130