Selected Items / All Items; Too Many Parameters; Selected Items - Zenith Z5 User Manual

⚫ Selected Items / All Items

➢ Too many parameters

Late model vehicles provide the more parameters, sometimes hundreds of
them are listed for a single system. Parameters are scattered here and there in
the data list, and the increased parameters makes it more difficult to check and
monitor the related parameters efficiently moving page to page for finding the
desired parameters one after another.
➢ Less the parameters, faster the data refreshing rate
As the more parameters are selected, it takes more time to receive data of
the increased number of parameters from the control module, and inevitably
it results in slower data refreshing rate. And vice versa: the fewer
parameters you select, the faster data frame refreshing rate you get.

➢ Selected Items

Switch to the [Full Screen] Mode and select the desired parameters from the
data list by ticking on the check box in the head of the parameter names. Select
[Select Item] on the left, then just the selected parameters are listed in the
screen as shown below.
User Manual ver.1.03
71