Feedback; Purpose Of Feedback; How To Log Data; Start Data Log Mode - Zenith Z5 User Manual

9.2 Feedback

Purpose of Feedback

Data Log function was designed as a to utilize Zenith as a terminal for interacting
with the individual Zenith users by allowing them to provide accurate and sufficient
feedback information to Korea in case of function failure or error, with which the
software developers could pinpoint the cause of the problem and find out the
solution precisely.

How to log data

In case any diagnostic function fails or does not work properly as intended, you can log
the data transmission between Z5 and the vehicle control unit by 1) starting Data Log
mode, 2) repeating the same function until it finally fails like experienced previously, 3)
stopping Data Log mode.
A. Start Data Log Mode
You can start Data Log mode by selecting [Log Data] button on the left of the
screen.
User Manual ver.1.03
103