Actuation Test; Actuation Test Item Selection - Zenith Z5 User Manual

5.6 Actuation Test

This is a function that runs or stops the active parts on the output side of the control module
such as injector, fans and valves, and examines the operation of the active parts and the
related circuits. * Supported actuation test items vary depending on the control systems of
vehicles.

⚫ Actuation Test Item Selection

User Manual ver.1.03
Select [Actuation Test] from
diagnostic functions menu after
selecting a control system for
diagnosis
Select an auction test item from
the list in the upper section of
the screen.
>> Observe the vehicle
condition for each test on the
Left side screen.
>> Select [SELECT] button on
the right of the screen.
Search and select the related
data parameters in the lower
section of the screen for
reference.
>> When done, select the option
for ◀ ▶ control on the left and
check the response of the
selected active parts and the
vehicle control system's
reactions by monitoring the live
data provided in the lower half of
the screen
79