Power Supply To Z5; Diagnostic Connector; Ac Outlet (Through Ac/Dc Adapter - Zenith Z5 User Manual

2.6. Power Supply to Z5

Power supply to Z5 is available from 2 different sources.

Diagnostic connector

1. Extend the Z5 main cable to the vehicle side diagnostic socket. Attach the paring
OBD non-standard connector if necessary.
2. Turn the ignition key to ACC or ON position, and power is supplied to Z5.
The power is supplied through the diagnostic socket even when the IG key is turned
OFF. However, please note that the IG key must be turned ON for diagnostic
communication.
3. By the industrial standard, all OBD-2 / EOBD compliant vehicles are designed to
supply power through the diagnostic adapter.
4. According to SAE and ISO standards, the vehicle side DLC socket is recommended
to be placed within 1 meter from the driver's seat.
It is generally found under the dashboard. However, be reminded that there are
exceptions.

AC outlet (through AC/DC adapter

1. Connect the DC jack of the AC/DC adapter to Z5's DC input jack.
2. Extend the AC plug of the AC/DC adapter to the AC outlet.
Cautions
Make sure to use the AC/DC adapter that is supplied with Z5. Damage caused
from use of unapproved AC/DC adapter is not subject to warranty.
User Manual ver.1.03
24