INTRODUCTION Congratulations on your choice of a JVA Energiser. In choosing to purchase a JVA product you have opted for the highest quality in electric fencing. Please read this manual entirely before installing or operating your new energiser. All JVA products offer a three-year warranty against faulty components and workmanship but excludes environmental extremes (i.e.
(eg. 1.8m Galvanized earth rods) driven into the earth to a depth of at least 1.2m. Three earthing rods are recom- mended for customers purchasing the MB8, MB12, or MB16. Addi- tional earth connections may be required at the energiser or along the fence in poor soil conditions.
POWER SUPPLY OPTIONS The JVA MB electric fence energisers can be powered from a number of power sources. a. 12V external battery (not supplied) b. 12V external battery with solar panel (not supplied) c. 110/240Vac via power pack (supplied with MB models only) The JVA SV series of electric fence energisers are fully self contained solar powered energisers.
AUTO-SYNC TM Auto-Sync™ is a new method of synchronising electric fence energisers patented by Pakton Group Pty Ltd. Auto-sync detects when something or someone touches the wires from two different electric fences, and synchronises the output pulses so that the potentially dangerous condition of receiving more than one pulse per second is avoided.
RECHARGEABLE BATTERIES 1. The SV5/SV10 contains a rechargeable sealed lead acid (SLA) battery, while other JVA MB energisers are compatible with lead acid batteries. SLA battery life is shortened considerably if it is a. left in a discharged state or;...
JVA MODELS AND FEATURES FEATURES MB12 MB16 SV10 Mains powered Battery powered Digital control “Smooth” wave shape Power on demand LCD showing kV and Stored Energy Ant & moisture protec- tion UV stable enclosure Overload indication (Audible and Visible) Lightning protection...
Page 11
• Battery life maximization works by slowing the frequency of high volt- age pulses just before the battery dies to keep the energiser going for as long as possible without damaging the battery. • The over discharge battery protection will stop the energiser when the battery is flat and flash the status LED twice each second.
Page 13
Symbols • # - No load, actual voltage on a short fence can be as high as 10kV • ~ - Current drain rating is for a 12.5V power source. Current drain will vary with voltage. • ^ - Recommended solar panel sizes based on the number of sun hours/ day a region receives.
JVA MODELS AND FEATURES 1. Status indicates fence overload or internal energiser fault (red LED) 2. Energiser On and OK indicator (green LED) 3. High Power fence connection terminal 4. Low Power fence connection terminal (Not on SV5/SV10) 5. Ground/Earth return connection terminal 6.
Status Symbols (model dependant): • Wi-Fi Connection and Strength (Only on MBxL) • Bluetooth (Not used) • Solar input active (Only on SVx) • Mains input active (Only on MBxL) LCD Screen Examples 1. Charging from sunlight (SVx only) 2. Battery Fully Charged 3.
Page 19
Mains Power Source: Attach the energiser to the supplied power pack. Plug the power pack into the mains power outlet and turn on the switch at the wall. The mains power pack MUST be kept indoors! Solar Power Source: It is recommended that a solar regulator is used in conjunction with a solar panel and a rechargeable battery.
The fence and the earth voltages can be mea- sured using an electric fence digital voltmeter or digital electric fence directional fault finder (the JVA Electric Fence Fault Finder). BENEFITS OF ELECTRIC FENCES •...
FENCE RETURN SYSTEM The Fence Return configuration for electric fences is used where the soil could be too dry to complete the circuit, or the animals are likely to try to force their way through between the fence wires. In this system earth wire(s) are also run along the fence with the live wire(s) to provide a low resistance path for the current to return to the energiser.
(See Errors and Error Codes) on the LED and LCD displays. MOISTURE AND ANTS Moisture and Ants should not be a significant problem for the JVA range of energisers as they come in a weatherproof case. Still, where possible, keep the energiser protected from the weather.
BATTERY REPLACEMENT (SV5/SV10 ONLY) The JVA SV series of energisers contain a sealed lead-acid (SLA) or LiFePo4 battery that is charged by the solar panel. If the unit indicates a depleted battery it will flash the red error LED twice. The unit should be turned off and placed in full sun for 2 to 3 days to allow the battery to fully charge.
Page 28
(see image below) 5. Remove the battery and replace it with an equivalent 12V SLA battery of the same dimensions (JVA COB004 or AUS. Jaycar SB2486). Remove J1 shunt Alternative battery LiFePO4 (JVA COB010 or AUS. Jaycar SB2210).
ERRORS AND ERROR CODES The JVA energiser may stop and display error codes. The error codes are displayed in two places. The first of these is on the Status (red) LED, where it will flash rapidly a number of times. The number of these flashes cor- responds to the Error Code.
Using an electric fence volt meter or a JVA Electric Fence Fault Finder (do not use a standard multi- meter) check what the voltage is at the earth terminal of the energiser. In general you should see a reading less than 300 volts (0.3kV).
Page 33
or pathway shall be identified at frequent intervals by warning signs se- curely fastened to the fence posts or firmly clamped to the fence wires. 5.1 The size of the warning sign shall be at least 100 mm x 200 mm. 5.2 The background colour of both sides of the warning sign shall be yel- low.
PARTICULAR REQUIREMENTS FOR ELECTRIC ANI- MAL FENCES IN AUSTRALIA 1. A distance of at least 10 m shall be maintained between the energiser earth electrode and any other earthing system connected parts such as the power supply system protective earth or the telecommunication system earth.
Whilst every effort has been made to check that the information contained in this manual is accurate, JVA Technologies will not be liable to loss or damage resulting from construction, operation or failure of any installation or system.
Need help?
Do you have a question about the MB8 and is the answer not in the manual?
Questions and answers