Table of Contents
Advertisement
8
www.aeg.com
4. CONTROL PANEL
4.1 Knobs for the cooking
zones
You can operate the hob with the knobs
for the cooking zones.
You must read the Safety
chapters in the hob user
manual.
4.2 Heat settings
Knob indication
0
1 - 9
1. Turn the knob to a necessary heat
setting.
2. To complete the cooking process,
turn the knob to the off position.
4.3 Automatic heat-up
Only applicable for hobs
with the automatic heat-up
function.
4.5 Buttons
Sensor field / Button
Function
Off position
Keep warm setting
Heat settings
Function
MINUTE MIND-
ER
CLOCK
TEMPERATURE
The automatic heat-up function heats the
cooking zone with full power for some
time.
1. Turn the knob for the cooking zone
clockwise as far as possible (beyond
the highest heat setting).
2. Immediately set the necessary heat
setting.
3. To deactivate the function, turn the
knob to the off position.
4.4 Using the double zone (if
applicable)
To activate the double zone,
turn the knob clockwise. Do
not turn it through the stop
position.
1. Turn the knob clockwise to position
9.
2. Turn the knob slowly until you can
hear a click. The two cooking zones
are on.
3. To set the necessary heat setting
refer to "Heat settings".
Description
To set the MINUTE MINDER. Hold it for
more than 3 seconds to turn on or turn off
the oven lamp.
To set a clock function.
To check the oven temperature or the
temperature of the core temperature sen-
sor (if applicable). Use only while a heat-
ing function operates.
Advertisement
Table of Contents
