How To Install Your Canopy Housing; How To Install Your Glass - Fanimation KERRING FP3073 Series Instructions Manual

How to Install Your Canopy Housing

NOTE: This step is applicable after the neccessary
wiring is completed.
1. Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care not
to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that was
previously removed. (Figure 1)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
2.
Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket
utilizing the key slot twist-lock feature. (Figure 2)
1. Install glass assemblies onto sockets by threading
in a clockwise direction. (Figure 1)

How to Install Your Glass

Glass Assembly
12
Ceiling Canopy
Figure 1
Canopy Screw
Cover
Figure 2
Motor Assembly
Figure 1