Summary of Contents for Fanimation Bourbon Street FP510 Series
Page 1
Net Weight 48 lbs (21.7 kg) Motor Assembly FP580 Net Weight 26 lbs (11.8 kg) WARNING: Support Directly From Building Structure Model No. FP510 / 520 Fan Series Model No. FP580 Motor Series OWNER’S MANUAL READ AND SAVE THESE INSTRUCTIONS...
Fanimation. 7. Fanimation reserves the right to modify or discontinue any product at any time and may substitute any part under this warranty. 8. Under no circumstances may a fan be returned without prior authorization from Fanimation. The receipt of purchase must ac- company authorized returns and must be sent freight prepaid to Fanimation.
Fanimation. Substitution of parts or accessories not designated for use with this product by Fanimation could result in personal injury or property damage. Contact your retail store for missing or damaged parts.
Unpacking Instructions and Parts Identifi cation (cont’d) FP510 (Short)/FP520 (Long) Pulley Assembly and Hardware Parts Identifi cation FP520 Long Neck Fan Pulley Assembly Wood Blade Screws, ˝-24 x ½˝ (10) & Fiber Washers (10) Lag Bolts (3) & Flat Washers (3) NOTE: The illustration shown is not to scale or its actual confi...
Electrical and Structural Requirements Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. INSTALLATION NOTE It is recommended that each fan and the motor have ¾˝ plywood backing secured to a structural member for adequate support (Figure 1).
Fanimation. Substitution of parts or accessories not designated for use with this product by Fanimation could result in personal injury or property damage. Contact your retail store for missing or damaged parts.
Page 7
Mounting Fan / Pulley Unit: 1. Using the cardboard square (used as packing in the FP510 or FP520) as a template, mark the three mounting holes positions located on the base (Figure 1) of the fan/pulley unit.
1. Wrap the belting around the two pulleys that will be connected and overlap the belting as shown. Use the spring clamps provided to hold the belting in place temporarily. With the clamps remaining in the same place, grasp both ends of the belting and pull tight.
(Figure 2) NOTE: Various optional blades are available for this assembly (see below). See Catalog or visit our website, www.fanimation.com for more information. FP1018 Reversible Oak / Walnut Wood Blade (sold separately) Mounting the Fan Blades...
Periodic cleaning of your new ceiling fan is the only maintenance that is needed. When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. Abrasive and/or non-abrasive cleaning agents are not required and should be avoided to prevent damage to finish.
For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan. Trouble 1. FAN WILL NOT START 1. Fuse or circuit breaker blown. 2. Loose power line connections to the fan, or loose switch wire connections in the switch housing.
Parts List FP580 Motor Assembly Ref. # Description Bourbon Street Motor Assembly Switch Cap Assembly Screw, Pan Hd, -32 x ¼˝ Wiring Harness Flat Washer Switch Cap Adapter Motor Pulley Motor Housing M/S, Washer Hd, 8-32 x 3½˝, Black Motor Lock Washer, External Lock Nut, Nylon Insert, Loose Parts Bag Containing:...
The Bourbon Street Exploded-View 13, 14 NOTE: The illustration shown is not to scale or its actual confi guration may vary. Wires partially removed for clarity. Motor Pack ® FP580 Figure 1...
Parts List FP510 Fan Pulley Assembly - Short Ref. # Description Short Fan Assembly Switch Cap Locknut, Steel, 1/8˝ IPS Flat Washer, 0.04˝ ID x ¼˝ OD Switch Cap Adapter Flywheel Short Leg Collector Bearing, Collector Flat Washer, ¼˝ Black Hex Head Bolt, ¼-20 x 1˝, Black...
The Bourbon Street FP510__ (Short) Exploded-View NOTE: The illustration shown is not to scale or its actual confi guration may vary. Fan Pulley Assembly Pack ® (fastens under the Fan Base) Figure 2 21, 22 (fastens under the Fan Base)
Parts List FP520 Fan Pulley Assembly - Long Ref. # Description Long Fan Assembly Switch Cap Locknut, Steel, 1/8˝ IPS Flat Washer, 0.04˝ ID x ¼˝ OD Switch Cap Adapter Flywheel Long Leg Collector Bearing, Collector Flat Washer, ¼˝ Black Hex Head Bolt, ¼-20 x 1˝, Black Hex Head Bolt, ¼-20 x 1½˝, Black Fan Base...
The Bourbon Street FP520__ (Long) Exploded-View NOTE: The illustration shown is not to scale or its actual confi guration may vary. Fan Pulley Assembly Pack ® (fastens under the Fan Base) Figure 3 20, 21...