HERON 8896231 Owner's Manual

HERON 8896231 Owner's Manual

Petrol/lpg/cng generator
Hide thumbs Also See for 8896231:

Advertisement

Quick Links

8896231
8896322
8896324
Petrol/LPG/CNG Generator
Owner's Manual
Version 01/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8896231 and is the answer not in the manual?

Questions and answers

Summary of Contents for HERON 8896231

  • Page 1 8896231 8896322 8896324 Petrol/LPG/CNG Generator Owner's Manual Version 01/2021...
  • Page 2: Table Of Contents

    Table of contents Introduction Dear customer, Thank you for the confidence you have shown in the HERON® brand by purchasing this generator. Introduction Page 3 This product has been tested for reliability, safety and quality according to the prescribed relevant norms and Description Page 4 regulations of the European Union with additional testing for compliance with NZ/Aus standards. Illustrated Parts Images Page 6 Contact our customer and consulting centre for any questions at: Assembly (Model 896321) Page 9 www.madalbal.co.nz Assembly (Model 896322) Page 10 Manufacturer: Madal Bal a.s., Průmyslová zóna Příluky 244, CZ- 760 01 Zlín, Czech Republic Assembly (Model 8896324) Page 11 Distributed in New Zealand/Australia By: Madal Bal NZ, 57 Grey Street, Onehunga, Auckland 1061, New Zealand Operation Page 12 Date of issue: 1 Aug. 2021 Periodic Maintenance Page 14 Troubleshooting Page 17 Specifications Page 18...
  • Page 3: Description

    I. Description - use of generators The generators have an electrical start (only model 8896324) making starting easy with the simple press of a button. It is also possible to start the generators manually (using the pull cord) in the event that the gel 12 V battery (AGM) is flat. HERON”” generators are intended for powering tools or other electrical appliances in locations where mains power is not available. The generators are equipped with a digital counter of total operational hours from the first start, operational hours from the previous start, current voltage and frequency. All values HERON® Model 8896231 Digital Inverter Generator combines user comfort, derived from its can be displayed on the digital readout. small size and weight, with a substantial power output of 3 700 W for powering tools for work on construction sites, in mobile service centres, as well as other electrical appliances that are sensitive to frequency fluctuations for recreational purposes. The electronic input voltage regulation system AVR limits voltage fluctuations, which could result in damage to the connected electrical appliances. Conditions for powering 3700W 3700W Max. Max. sensitive electrical appliances (computers, TVs, office Rated. 3500W Rated. 3000W equipment, etc.) are provided in the following pages. AC 230V ~ 50Hz AC 230V ~ 50Hz PETROL &...
  • Page 4 Model # 8896322 Model# 8896231 Recoil starter knob 1. Engine 34. Generator terminal (not equiped) Manual switch of gas inlet 2. Oil drain plug 35. City power terminal (not equiped) Gas inlet 3. Oil filler cap 36. ATS Connector (not equiped) Engine 4. Manual switch for gas inlet 37. Grounding terminal (not equiped) Oil drain plug 5.
  • Page 5: Assembly (Model 896321)

    Assembly Model 8896231 Tools Required 1. Adjustable wrench 2. Philips screwdriver Instructions: Very little assembly is required for this model Note: All hardware specified is provided with the assembly kit 1. Remove the generator body and parts box from the packaging. 2. Fill the generator with oil. (10W-30 oil, 600ml) 1. Engine Model: 8896324 2. Oil drain plug 3. Oil filler cap 4. Battery 5. ATS Output 6. Hz/H/V Calculagraph 7. AC receptacle 8. Ground (Earth) terminal 9. DC12V Receptacle 10.
  • Page 6: Assembly (Model 896322)

    Assembly Model 8896322 Assembly: Model 8896324 Tools Required Tools Required 1. Adjustable wrench 1. Socket set 2. Philips screwdriver 2. Adjustable wrench 3. Philips screwdriver Instructions: Very little assembly is required for this model Instructions: Note: All hardware specified is provided with the assembly kit Note: All hardware specified is provided with the assembly kit 1. Remove the generator body and parts box from the packaging. 1. R emove the generator body and parts box 2. Connect the wiring to the battery (red positive and black negative). Use the small screws provided from the packaging. 3. Fill the generator with oil. (10W-30 oil,1100ml) 2. U sing 4 off bolts and nuts secure one axle assembly to the generator frame. Note there are 4 pre-drilled holes in the frame for each axle located in the frame member under the engine.
  • Page 7: Operation

    For Petrol Operation: For cold start 1. Fill the petrol tank (91 octane unleaded petrol) 1. Move the choke lever to the “CLOSED” position. 8896231: 15l, 8896322: 25l, 8896324: 28l 2. Set the circuit breaker to the “OFF” position. 2. E nsure the petrol stopcock is in the on position (See below) and the gas stopcock is in the “OFF position 3. Set the Engine switch to the “ON” position. Fuel Stopcock...
  • Page 8: Periodic Maintenance

    30 Nm (3.0 kgf m,22 lbf ft) 5. Add engine oil to the specified level. Recommended oil: SAE #30 or lOW-30 Oil Quantity: 8896231: 600ml, 8896322: 1100ml, 8896324:1300ml Air Filter Maintenance 1. Remove the air filter cover and element. 2. Wash the element in solvent and dry.
  • Page 9: Troubleshooting

    Fuel Filter Trouble Shooting 1. Turn the fuel cock lever to “CLOSE”. 1. Turn the fuel cock lever to “CLOSE”. 2. Using a suitable wrench, remove the cap on the underside of the stopcock. (Be careful to ensure that Problem Cause Solution the small components inside are not lost.)
  • Page 10: Specifications

    Technical Specifications Warranty Information 01. Madal Bal Ltd (trading as Heron Generators) warrants to the original purchaser only, that the product 8896231 8896322 8896324 purchased shall be free from defects in material and workmanship under normal use and service during Rated AC Voltage the warranty period.

This manual is also suitable for:

88963228896324

Table of Contents