Page 1
High Back Mesh Chair Black Assembly Instructions Please keep for future reference 6172884 Dimensions Width -60cm Depth -62cm Height - 107/115cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the...
Page 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly components and tools listed on the product during assembly, recommend the pages 3 and 4. this could cause damage. use of power drill/drivers for inserting screws, plastic bags and separate them to its nal position (in the same as this could damage the unit.
Page 3
Components - Parts Please check you have all the parts listed below Backrest x1 Seat x 1 Left armrest x1 & Right armrest x 1 (73x48.5cm ) (52x50cm ) Base x 1 Gas lift x 1 Seat plate x 1 ( 320mm ) ( 80mm ) ( AJ19 A-2 )
Page 4
Fittings Components - If you have damaged or missing components, call the Customer Helpline:0845 640 0800 Please check you have all the fittings listed below. Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. 20mm Bolts x 4 30mm Bolts x 4 25mm Bolts x6...
Page 5
Assembly Instructions Step 1 Fitting the base Push all the five castors into the underside of the base Ensure all the castors NOTE: firmly located on the base. Insert the gas lift into base Ensure the gas lift is NOTE: fully inserted and well fitted.
Page 6
Assembly Instructions Step 2 Fitting the Seat Cushion Use bolts B to fix the seat plate onto the seat Ensure the support is fitted to the seat with correct orientation. It would be useful to ask NOTE: someone to help you at this stage.
Page 7
Finishing the Unit Carefully place the unit in the desired location. Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800 489-499 Avebury Boulevard Milton Keynes MK9 2NW, Argos Limited...
Need help?
Do you have a question about the 6172884 and is the answer not in the manual?
Questions and answers