Table of Contents
Advertisement
Page
Ver.
Item
BLACK
CLEAR
SHADING
AUTO SET UP
AUTO BLACK
AUTO BLACK
LEVEL AUTO
1.10
AUTO HUE
WHITE
SHADING
BLACK
SHADING
1.10
COLOR REF
(SELF)
1.10
COLOR SETUP Throw MENU SELECT
(SELF)
DATE/TIME
DD/MM/YY
HH:MM:SS
DATE ON BARS ON, [OFF]
TIME ON BARS ON, [OFF]
c)
When executing the LEVEL AUTO, data set through the menu is all cleared and the automatic level adjustment is performed in
sequence, After the adjustment is complete, adjustment result is stored as a master setup data.
1. A reference file which is reference for adjustment is loaded .
2. Lens is autmatically closed and the black balance is automatically adjusted.
3. The white balance is automatically adjust using TEST 2 (3-step) signal.
m
This white balance adjustment compensates a drift of the gain of an amplifier, does not compensate color temperature for an actual object.
The gamma and knee compensation values do not change with a lapse of time because of the digital-processing camera.
Therefore, the gamma and knee compensation values remains the values stored in the reference file.
k)
Before first using the camera with the OHB-400/500/500WS (or their PAL version) installed, or After replacing the CCD unit, be sure
to execute the automatic black shading adjustment.
m) When performing compensation between two or more cameras, use the MSU.
n)
Differing from the color-setup operation by plural cameras, a data transfer is not performed.
Execute to recalculate. After execution, the color matrix data is temporarily reflected in the OHB matrix of the System Config menu.
Execute the OHB FILE STORE of the Triming menu to store the color matrix data.
BVP-500
BVP-500P
http://getMANUAL.com
Settings
Contents
Throw MENU SELECT
Resets numeric settings to "0" on the BLACK SHADING page.
switch to ENTER
(When you throw MENU SELECT switch to ENTER, the "CLEAR" indication
to execute.
flashes. Throw MENU SELECT switch to ENTER again to execute; throw to
CANCEL to cancel.)
Throw MENU SELECT
Starts to automatically adjust the black balance.
switch to ENTER
to execute.
Throw MENU SELECT
Starts to automatically adjust the black balance.
switch to ENTER
(To abort a processing during execution, throw MENU SELECT switch
to execute.
to ENTER.)
Throw MENU SELECT
Starts to automatically adjust the level in the internal circuits.
switch to ENTER
(To abort a processing during execution, throw MENU SELECT switch
to execute.
to ENTER.)
Throw MENU SELECT
Sets the skin detail hue function automatically.
switch to ENTER
(Locate the desired skin color within the gate marker of VF and measure.)
to execute.
Throw MENU SELECT
Starts to automatically adjust the white shading.
switch to ENTER
(To abort a processing during execution, throw MENU SELECT switch
to execute.
to ENTER.)
Throw MENU SELECT
Starts to automatically adjust the black shading.
switch to ENTER
(To abort a processing during execution, throw MENU SELECT switch
to execute.
to ENTER.)
Throw MENU SELECT
Makes a color reference to compensate the difference in colors
switch to ENTER
between OHBs using a single camera. (Locate the desired colors of a
to execute.
Macbeth chart within the gate marker of VF and measure. To abort a
processing during execution, throw MENU SELECT switch to ENTER.)
Automatically calculates the color matrix from the reference.
switch to ENTER
(Locate the desired colors of a Macbeth chart within the gate marker of
to execute.
VF and measure. To abort a processing during execution, throw MENU
SELECT switch to ENTER.)
Adjusts a built-in timer. (HH;hour/MM;minute only)
Selects whether the date characters are mixed with a camera output
signal in the color-bar mode, or not.
(This setting is valid only when the DISPLAY switch is set to on or off.)
Selects whether the time characters are mixed with a camera output
signal in the color-bar mode, or not.
(This setting is valid only when the DISPLAY switch is set to on or off.)
3-1. Setup Menu
3-1-3. Maintenance Menu
k)
n)
c)
m)
3-11
Advertisement
Table of Contents
