Advertisement
GB
D
I
P
NL
English .................................... p. 2
Deutsch................................. p. 10
Français ................................ p. 18
Español ................................. p. 26
Italiano ................................. p. 34
F
E
DK
S
S-3
Airless Spray Gun
3900 PSI Max. Operating Pressure
Stainless Steel Fluid Passages
Português ............................. p. 42
Nederlands ........................... b. 50
Dansk .....................................s. 58
Svenska .................................s. 66
0814
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Titan S-3
Summary of Contents for Titan S-3
- Page 1 Airless Spray Gun 3900 PSI Max. Operating Pressure Stainless Steel Fluid Passages English ........p. 2 Português ......p. 42 Deutsch......... p. 10 Nederlands ......b. 50 Français ........ p. 18 Dansk ........s. 58 Español ......... p. 26 Svenska .........s. 66 Italiano .........
- Page 2 ventilation, re prevention, and operation must be observed. HAZARD: Injection injury A high pressure stream produced by this equipment can pierce the skin and underlying tissues, leading to serious injury and possible amputation. See a physician immediately. which the injury was caused. HAZARD: Explosion hazard due to incompatible materials Will cause severe injury or property damage.
-
Page 3: Residual Risks
X marking: pump via the conductive high-pressure hose as stipulated. Residual risks Risk Impact Preventative measures Can occur during: Technical Data Max. operating pressure Material inlet thread size Wetted parts material Operating temperature range Maximum material temperature Maximum sound output Weight... -
Page 4: Operation
Introduction The arrow on the tip handle should be spraying. Operation Setup Never attempt to assemble, change, or clean the gun, tip, or tip guard without rst relieving pressure sprayer’s Owner’s Manual. spray pattern and coverage. When more coverage is needed, use a added protection against injection. - Page 5 Changing a Tip Cleanup Never attempt to change or clean the tip or tip guard without rst Removing the Seal and Tip seal The sprayer, hose, and gun should use. Failure to do so permits material Attention Always spray at minimum pressure with the tip and tip guard removed when using mineral spirits or any other solvent to clean the sprayer,...
-
Page 6: Maintenance
Maintenance Adjusting the Packing Seal Assembly seal assembly is essential to ensure proceeding. released. maintenance on the spray gun Flat side of Bevelled side of handle seal handle seal (toward gun head) (toward handle) lithium-based grease. Filter Chart Part Application Filter Filter Number... -
Page 7: Parts List
Parts list Item Part # Description Item Part # Description...
Need help?
Do you have a question about the S-3 and is the answer not in the manual?
Questions and answers