Table of Contents
Advertisement
1
Power on the device and select the operating
mode "Memory To PC" from the main menu.
Push the
button to open the memory
areas screen.
2
Select one of the four memory slots to trans-
fer its data to your computer. Use the
button
to highlight a specific slot and confirm it with
the
button.
3
Now the device waits for a Bluetooth connec-
tion initiated by the software.
30 / 36
4
Set up your Visualizer 3D Studio software with
all the corresponding settings as explained in
chapter
„6 PREPARING DATA TRANSFER" on
page
34.
Advertisement
Table of Contents
