Page 1
FS Future Series Bionic X4 Version 1.0 User's Manual...
Page 2
Any information contained in these operating instructions may be changed without prior notice. OKM does not make any warranty for this document. This also applies without limitation to implied assurances of merchantability and fitness for a specific purpose. OKM does not assume any responsibility for errors in this manual or for any incidental or consequential damage or loss associated with the delivery, exploitation or usage of this material.
Dear Customer, First of all we would like to thank you in choosing a product manufactured by OKM. The present product is based on a measuring method to detect gold objects that are a distance away from the operator. The longer the object is buried in the ground the better and deeper it can be located by the device.
In this section you will learn how to maintain your measuring instrument with all of its included accessories. This will keep it in good condition a long time and you will be able to get good measuring results. The following list indicates what you absolutely should avoid: OKM GmbH www.okmmetaldetectors.com...
Moving such an object may cause those crystals to produce friction, leading to an explosion. If you come across such relics, mark the place and do not fail to report the find to the police or proper authority. Such objects always pose a danger to the life of hikers, walkers, farmers, children and animals. OKM GmbH www.okmmetaldetectors.com...
Operating temperature ...................... 15 °C to +35 °C 2.3 Data Transfer Technology ........................Bluetooth, class 1 Frequency ........................2.4 – 2.4835 GHz Maximum Transfer Rate ........................1 Mbps Receiving Sensitivity ........................-85 dBm Maximum Range ......................... max. 10 m OKM GmbH www.okmmetaldetectors.com...
Page 12
In the following section you can find all standard equipment and optional parts of the Bionic X4. Description Quantity Control unit Wireless headphones including 2 batteries (AAA) Android Smart Phone and included accessories Power Pack incl. charger and traveling adapter User manual Carrying case Table 1: Scope of delivery OKM GmbH www.okmmetaldetectors.com...
4 Control elements HAPTER Control elements In this section you will learn more about the fundamental use of all control elements for this measuring instrument. All connections, inputs and outputs are explained in detail.
Those electrodes are used to measure your body's bio-energy which influences the whole measurement. Connector for Power Pack: The Bionic X4 has no internal batteries but uses the external Power Pack. Additional information about the usage and care of the Power Pack you may find in the separate description. OKM GmbH www.okmmetaldetectors.com...
Page 15
Laser pointer: The laser pointer can be used at night searches for optical directional reference. The laser pointer is just some additional tool to assist you in determining the position of located objects. Please pay attention to the security information in chapter 6.4 on page 30. OKM GmbH www.okmmetaldetectors.com...
Power on the wireless headphones with the power on/off button (ON/OFF) and find the correct channel with the frequency regulator (TUNE). The device Bionic X4 should be powered on and release an acoustic signal during this adjustment. Via the volume control (VOL) you can regulate the volume of the headphones. OKM GmbH www.okmmetaldetectors.com...
If you decide to work with Smart Phone you have to switch it on and follow the next steps. If you decide to work without Smart Phone you have to continue with step 8! Figure 5.3: Switch on the Smart Phone OKM GmbH www.okmmetaldetectors.com...
For charging the Smart Phone while working with the device you have to connect the big end of the USB cable with the USB port of the device and ... Figure 5.6: Connecting the USB cable to the device OKM GmbH www.okmmetaldetectors.com...
Figure 5.8: Switch on the Bionic X4 Step 9 After switching on the device, the menu item „Bionic Scan“ appears in the display. Now your device is prepared for the first measurement. Figure 5.9: Start the measurement OKM GmbH www.okmmetaldetectors.com...
6 Operating modes HAPTER Operating modes In this section you will learn more about operating the device. Every operating mode will be explained in a proper subsection.
To switch between the menu items you have to press the handle button. Push it one time to get to the next menu item. The complete menu structure is displayed in figure 6.1. Figure 6.1: Complete menu structure OKM GmbH www.okmmetaldetectors.com...
The higher the unit is calibrated to the more exact it will look for gold. Wait then a couple of seconds so that the value is stable before pushing the green button. The shown frequency needs to be stable before OKM GmbH www.okmmetaldetectors.com...
Afterward press on the green button again to return to the main menu so that you can complete the triangulation and locate the object. OKM GmbH www.okmmetaldetectors.com...
Smart Phone, you will have an image similar to the one shown in Figure 6.6. Compass Bluetooth Symbol North North East East South East South South West West North West Figure 6.6: Screenshot of the Smart Phone OKM GmbH www.okmmetaldetectors.com...
Figure 6.8 , you will see the images. 1. Picture 2. Picture Figure 6.8: Completing the cross bearing There on the display the image will be see on the Smart Phone display and then you can study the OKM GmbH www.okmmetaldetectors.com...
Page 27
There where the two images are a triangulation can be made and this will be the point of highest probability. Clicking again the trigger on the hand grip will clear the images so that you can begin again. OKM GmbH www.okmmetaldetectors.com...
The one item to take note of is that when using the Ionic mode the searchable area is limited to the South. You will need to have the North at your back. The limited search area is from the South East (SE) to the South West (SW). OKM GmbH www.okmmetaldetectors.com...
Another advantage to using the Smart Phone with its included digital compass is to remain within the SE to SW area. The compass will show you which direction you are pointed ensuring that you can keep North to your back. OKM GmbH www.okmmetaldetectors.com...
During operation of the device, the laser has to be directed in such a way that no person is located within the range of projection and that unwanted reflected rays (e.g. due to reflecting objects) do not get into the range of any person. OKM GmbH www.okmmetaldetectors.com...