Advertisement
7.6 PnP/PCI Configurations
Selecting "PnP/PCI Configurations" on the main program screen display this menu :
This option that configures how PnP and PCI expansion slots operate on the motherboard
use system IRQs & DMAs. You must setup the IRQ and DMA assignment correctly through
the PnP/PCI Configuration setup Utility, otherwise the motherboard will not work properly.
7.6.1 PnP OS Installed [Yes]
If you have installed a PnP operation system such as Windows 95 or 98, you can set
this item to Yes. The Device Manager Utility in the operation system to make changes
to the configuration of expansion cards.
The available options for PnP OS Installed are : [Yes] [No].
7.6.2 Reset Configuration Data [Disabled]
If you enabled this item and restart the system, any PnP configuration data stored in
the BIOS setup is cleared from memory. New updated data is created.
The available options for Reset Configuration Data are : [Disabled] [Enabled].
7.6.3 Resources Controlled By [Auto (ESCD)]
IRQ Resources [Press Enter]
Memory Resources [Press Enter]
You should leave this item at the default [Auto (ESCD)]. Under this setting, the sys-
tem dynamically allocates resources to PnP devices as they are required.
The available options for Resources Controlled By are : [Auto (ESCD)] [Manual].
The available options for IRQ/Memory Resources are : [Press Enter].
After you have made you selection(s) in the PnP/PCI Configuration setup, press
the <ESC> key to go back to the main program screen.
7. BIOS Configuration
M81-MX Series User's Manual
45
Advertisement
