Advertisement
Step6: Front Panel I/O Connectons
Follow the instruction carefully for proper connections to your front panel display
and control.
Power SW
(If you have a speaker on the chassis that we recommend not to use them
because it will have buzzer noise when the system is booted.)
Step7: ATX1 / HDD / FDD Power Connection
Connect ATXPWR of the power supply unit to the ATX1 connector on the
motherboard.
Connect HDDPWR of the power supply unit to the power connector on the HDD
device.
Connect FDDPWR of the power supply unit to the power connector of the FDD
device.
Note : Incorrect installation of the power supply could result in serious damage
Step8: Back I/O Connections
Follow the instruction carefully for proper connection I/O peripherals to your
system.
Keyboard Mouse Monitor AC power cord.
Step9: Boot the system
You are now ready to boot the system for the first time. Please continue to the
next section to configure your BIOS(Basic Input Output System) setting. It must
be configured after booting.
24
M81-MX Series User's Manual
Reset SW
HDD LED Power LED Key Lock
to the motherboard and connected peripherals. Make sure the power
supply is unplugged from the AC outlet before connecting the leads from
the power supply.
Advertisement
