Download Print this page

Delta M81 Series User Manual page 34

Advertisement

When this item is enabled, it allows the system to carry out cache memory error
checking if the cache memory chips support ECC (Error Checking and Correction).
The available options for CPU L2 Cache ECC Checking are : [Enabled] [Disabled].
7.2.4 Processor Number Feature [Disabled]
If you have installed Pentium III Processor on the motherboard and enabled this
item. It will provides a Processor serial number for your system certify.
The available options for Processor Number Feature are : [Disabled] [Enabled].
7.2.5 Quick Power On Self Test [Enabled]
This will skip some diagnostic checks during the Power On Self Test (POST) to
speed up the booting process.
The available options for Quick Power On Self Test are : [Enabled] [Disabled].
7.2.6 First/Second/Third Boot Device [Floppy]/[HDD-O]/[LS/ZIP]
These items to setting the priority and sequence the devices that your system will
search for an operating device during bootup.
The available options for First/Second/Third Boot Device are : [Floppy] [LS/ZIP] [HDD-
0] [HDD-1] [HDD-2] [HDD-3] [SCSI] [CDROM] [LAN] [Disabled].
7.2.7 Boot Other Device [Enabled]
If you enable this item, the system will search all other possible locations for an
operating device it fails to find one in the devices specified under First, Second and
Third Boot Devices.
The available options for Boot Other Device are : [Enabled] [Disabled].
7.2.8 Swap Floppy Drive [Disabled]
If you have two floppy drive in your system, this item allows you to swap around the
assigned drive letters so that drive A become drive B, and drive B become drive A.
The available options for Swap Floppy Drive are : [Disabled] [Enabled].
7.2.9 Boot Up Floppy Seek [Disabled]
If this item is enable, it checks the geometry of the floppy drive at start up time.
The available options for Boot Up Floppy Seek are : [Disabled] [Enabled].
7.2.10 Boot Up NumLock Status [On]
This item defines if the keyboard <NumLock> key is active when your system is
bootup.
The available options for Boot Up NumLock Status are : [On] [Off].
32
M81-MX Series User's Manual

Advertisement

loading

This manual is also suitable for:

M81dc-mxM81-mxM81l-mx