Advertisement
The POWER ON Function item allows you to power on the system by pressing hot
keys or typing a password. Refer to explain in the below.
[Password] : Disable the function of power button and let the system can only be
powered on through the preset keys (like a password).
[BUTTON ONLY] : Disable Wake on Keyboard an Mouse function. You can boot
up your system by power button only.
[Keyboard 98] : You can boot up the system by power and wake up button on
keyboard 98.
[Any Key] : This function allows you power on the system by clicking any key.
[Mouse Left] : This function allows you power on the system by double click on
mouse's left button.
[Mouse Right] : This function allows you power on the system by double click on
mouse's right button.
[Hot Key] : This function allows you power on the system by pressing function key
<Ctrl> + <F1> through <Ctrl> + <F12> on keyboard.
The available options for POWER ON Function are : [BUTTON ONLY] [Keyboard 98]
[Password] [Hot KEY] [Mouse Left] [Mouse Right] [Any KEY].
The available options for KB Power ON Password are : [Enter].
The available options for Hot Key Power ON are : [Ctrl-F1]~[Ctrl-F12].
7.4.6 Onboard FDC Controller [Enabled]
This item to turn on or off the floppy disk controller that is built into the motherboard.
The available options for Onboard FDC Controller are : [Enabled] [Disabled].
7.4.7 Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
These options are used to assign an I/O address and Interrupt Request Line (IRQ)
for two onboard serial ports.
The available options for Onboard Serial Port 1/2 are : [3F8/IRQ4] [2F8/IRQ3] [3E8/
IRQ4] [2E8/IRQ3] [Auto] [Disabled].
7.4.8 UART2 Mode Select [Normal]
RxD, TxD Active [Hi,Lo]
IR Transmittion Delay [Enabled]
UR2 Duplex Mode [Full]
38
M81-MX Series User's Manual
Advertisement
