Advertisement
6. Hardware Installation
6.1 Before you Begin
The M81-MX series motherboard is designed to fit into a standard Micro ATX form factor
chassis. The pattern of the mounting holes and the position of back panel I/O ports meet
the Micro ATX motherboard specification. The chassis may come with various mounting
fasteners which are made of metal or plastic. It is highly recommended to use as many
metal fasteners as possible to mount the motherboard in the chassis for better grounding.
6.2 Caution Static Electricity
Before removing the motherboard from its anti-static bag, you need to eliminate any static
electricity that may be accumulated on your body by touching a grounded or anti-static
surface. If noting is available, touch the housing of power supply which is plugged into the
AC outlet.
After removing the motherboard from its anti-static bag, place it only on a grounded or anti-
static surface, component side up. Inspect the motherboard and contact you retailer
immediately if it is damaged.
6.3 Installation Guide
We will now begin the installation of motherboard. Please follow the procedure step-by-
step which designed to guide you to a complete and correct installation.
Step1: Install the PPGA370 Processor.
Locate Pin-1 on the processor and PGA370 socket, then open the locking lever
for processor.
Orient the processor and insert vertically on to the socket until the processor clip
into place.
20
M81-MX Series User's Manual
Alignment Edge
Advertisement
