Step
Attach fittings to each BIB disconnect. If the
fittings are not available, the fittings from empty
BIB bags can be cut from the bags and used.
4.
These fittings open the disconnects so the
sanitizing solution can be drawn through the
disconnect.
Place all the BIB disconnects into the pail of
sanitizer. Flush sanitizer through every product
5.
line. Use the selection screen to toggle flow on/
off by selecting each brand, up to 4 at one time.
Fill a suitable pail or bucket with approximately
6.
2.5gallons (9.5 liter) of water
Place all the BIB disconnects into the pail of
water. Flush water through every product line.
7.
Use the selection screen to toggle flow on/off by
selecting each brand, up to 4 at one time.
© 2019, Cornelius Inc.
Table 29. Product Line Cleaning (Continued)
Action
- 41 -
ABS 2.0 Operator's Manual
Figure
Figure 85.
Figure 86.
Figure 87.
Figure 88.
Publication Number: 621058590OPR