Ranger PM7000 Start Manual page 32

This screen gives you the opportunity to adjust the nominal phase voltage by pressing
or delay the start by pressing .
See "USB Memory Device operations in the Ranger PM7000" in the manual for more information
on the delayed start facility.
Now we can start recording. Touch and the logger will start recording. The screen
will revert to the 'Main Menu':
Note the recording button has changed to give you the option to but the
button is greyed out so that you cannot inadvertently turn the power off while the logger is
recording.
The PM7000 is now set to record for 1 week. If the recording logger is interrupted by a power
outage, once power is resumed it will automatically restart in the same session for all the time the
restart is within that set period.
At the end of the set period the recording will stop automatically but it is perfectly OK to stop the
recording at any time to see the results, or download, and then 'start recording' again.
Your PM7000 can be configured and a recording started using either the PDA with its Bluetooth
communication method or the computer with its USB serial link.
PM7000 Start Guide Issue 1 090608 32