First Step - Ranger PM7000 Start Manual

First Step:

Please read and feel comfortable with the safety warnings below.
The Symbol
Please read and take careful note of the following safety
recommendations before using your PM7000 for the first time.
This symbol is displayed on the instrument to alert the user to the potential
danger of using it. The symbol also appears from time to time in the manual. In
some cases draws attention to the fact that the parts or adjustments to which
refers are not serviceable by the user. In all cases the unit MUST be repaired or
serviced by properly qualified personnel.
Please note that this includes changing internal fuses and batteries.
These following safety statements are particularly concerned with
connecting your logger to the power source. To ensure your safety and avoid any
damage to the PM7000 please take careful note.
Use extreme caution when connecting the signal input cables to the logger. Any
voltage potential at the signal source will exist on the instrument's respective signal
input cable. Consequently
the instrument case and also may exist on the signal input terminals, which are
floating with respect to the instrument chassis.
Because you will be attaching the PM7000 to a potentially hazardous live
circuit, you must be suitably qualified. Before you make any such connection or
disconnection you need to understand the dangers associated with doing this and how
PM7000 Start Guide Issue 1 090608
Warning
is about SAFETY and concerns YOU
HAZARDOUS LIVE VOLTAGES
may be exposed inside
3