Table of Contents
Advertisement
Clicking on
'recommended
rates...' will bring up Pronto Help and advice on the correct baud rate).
Currently the correct baud rate for the PM7000 is automatically chosen by Pronto. In the future if
further types of communication mode become available (such as over the mobile phone network) it
may be necessary to change the baud rate.
Click OK to return to the 'Select Instrument to Control' window.
Finally click on 'Connect'....
and you'll see on the screen 'Pronto is connecting to the instrument'. 'Control panel' comes up
next.
PM7000 Start Guide Issue 1 090608
17
Advertisement
Table of Contents
