Ranger PM7000 Start Manual page 21

Here is another possible initial screen.
Subsequent Connection to the Computer
Please note that NEXT time you open
Pronto it will remember the previous
connection information and four steps
will become only two steps.
If however you use a different port subsequently, Pronto will ask you to go through a similar
selection process, and then it will remember that connection also.
PM7000 Start Guide Issue 1 090608
In this simulator example the phasor
diagram shows 'Suspect Hook-up' to
alert you to the likelihood you have
fitted the wrong CTs. The give away
is the current, 90 degrees out of phase
with the voltage.
21