Table of Contents
Advertisement
The main Pronto window will come up.
Click on 'PmScreen' on the tool bar.
If you have a logger connected and are communicating with it, clicking on 'PmScreen' will bring
up PmScreens on the computer screen. Select the Simulator by clicking on 'connect' on the top tool
bar of PmScreens.
Follow the path from 'Launch Simulator' to 'PM7000' after which the Simulator screen will arrive.
See below.
If no logger is connected, when you open Pronto the following advice window will come up:
PM7000 Start Guide Issue 1 090608
23
Advertisement
Table of Contents
