Ranger PM7000 Start Manual page 19

To bring up your PM7000 display click on 'PmScreen' on the tool bar.
Now you can talk to your Ranger via the computer. The screen to come up will be whichever you
used the last time you talked to your PM7000. For the first time you will see the initial screen of
your PM7000 on the computer in front of you. This is the default screen with a 3 phase 4w Wye
Hook Up.
You can enlarge or contract the PmScreen area by clicking "View", Zoom in" or Zoom out". This
screen is intended to give you an immediate indication of system status, and especially the
connections you have made (the "Hook up"). The PM7000 does need to know what was intended
so that it can assess the voltage and current phases it finds correctly.
If you want further information click anywhere in the blue box and bring up a 'Hook-Up in Use'
screen.
Note the default Hook Up
Click on to get...
PM7000 Start Guide Issue 1 090608 19