Sixth Step; Make The Communication Between The Computer And The Pm7000 - Ranger PM7000 Start Manual

Sixth Step:

Make the communication between the computer and the PM7000

You can produce the same screens on your PC as you can on the PDA. To bring 'PmScreen' up on
the computer, first attach the logger via the USB communication lead provided.
Insert the customer CD. Because the PM7000 is using a USB communication method you need
hardware drivers. They may already be on your computer but if they are not click on "Install
PM7000 Hardware Drivers" and follow the instructions. If you are unsure whether or not you have
the drivers install them anyway. There is no adverse effect from re-installing them. Then launch
Pronto. Follow the "Start Up Assistant" to connect to your PM7000. The first time you make a
new connection there are four steps.
Startup Assistant Step 1
In step 1 the default selection is "Control and/or Playback data from a logger". You do not yet have
any data and files to browse for.
PM7000 Start Guide Issue 1 090608
The USB port will take either
a USB memory device (jump
drive) or a USB lead to
communicate with a PC.
11