Contemporary Controls BASstat BAST-421C-BW2 User Manual page 26

A reboot of the thermostat is required for new IP configuration to take effect. Click the Save & Restart
button to reboot the thermostat, and you will be prompted to confirm the restart. Click OK to Save New
Settings and Restart or click Cancel to revisit IP configuration.
When OK is clicked, a confirmation is displayed to indicate configuration is stored in the thermostat's
EEPROM. After reboot, the new thermostat credentials will be admin for user name and the newly
configured Access Point's password for password.
Click OK on the confirmation message and wait 20 seconds for the reboot process to complete.
UM-15093500-AA1 Page 25