Troubleshooting with LED
2. Troubleshooting with LED
2.1
Indoor Unit
Operation Lamp
The operation lamp blinks when any of the following errors is detected.
1. A protection device of the indoor or outdoor unit is activated, or the thermistor malfunctions.
2. A signal transmission error occurs between the indoor and outdoor units.
In either case, conduct the diagnostic procedure described in the following pages.
2.2
Outdoor Unit
The outdoor unit has a green LED (LED A) on the PCB.
When the microcomputer works in order, the LED A blinks.
Refer to pages 100, 101 for the location of LED A
52
LED INDICATION LIGHTS
FU3
V4
FU1
FU1
E, E2
V3
V5
LEDA
S70
S70
S40
S20
S21
S80
ON/OFF
switch
FU2
FU2
S90
S90
TH1
TH1
S92
S70
S91
DAMA-SM-21-003
X12A
X11A
Service Diagnosis