Ferroli BlueHelix HiTech RRT H Instructions For Use, Installation And Maintenance page 333

BlueHelix HiTech RRT H
Index Description
Fan On speed
P63
Fan maximum speed
P64
Not implemented
P65
Valve frequency
P66
Installation C10/C11
P67
Flue parameter
P68
* Restore Factory Values
To restore all the parameters to the factory values, set parameter b29 to 10 and confirm. Turn the
power off for 10 seconds and then back on.
At this point it is necessary to return parameter b02 to the correct value, according to the type of
boiler. Parameter b27 will be automatically set to 5.
Display Adjustment Menu [DISPLAY]
Here it is possible to set some display pa-
rameters.
[Contrast]
Contrast adjustment.
[Brightness]
Brightness adjustment
[Backlight time]
Display backlight duration.
EN
Range
DO NOT MODIFY
(The parameters are automatically updated)
DO NOT MODIFY
(The parameters are automatically updated)
--
0 ÷ 2
0 - 1
0 ÷ 10 (modify according to flue table)
cod. 3541V481 - Rev. 00 - 06/2021
Default
G20/G230:
BLUEHELIX HITECH RRT 18 H
= 160
BLUEHELIX HITECH RRT 28 H
= 160
BLUEHELIX HITECH RRT 34 H
= 140
G30/G31:
BLUEHELIX HITECH RRT 18 H
= 152
BLUEHELIX HITECH RRT 28 H
= 152
BLUEHELIX HITECH RRT 34 H
= 132
G20/G230:
BLUEHELIX HITECH RRT 18 H
= 140
BLUEHELIX HITECH RRT 28 H
= 172
BLUEHELIX HITECH RRT 34 H
= 194
G30/G31:
BLUEHELIX HITECH RRT 18 H
= 134
BLUEHELIX HITECH RRT 28 H
= 156
BLUEHELIX HITECH RRT 34 H
= 186
1
1
0
0
[Reset]
Restore factory values.
333