Engine Start/Stop Button - Sea-doo GTI Series Operator's Manual

PRE-RIDE INSPECTION
iTC lever
iBR lever (if equipped)
Front storage compartment cover (if
equipped), glove box and seat
Wakeboard rack (if equipped)
Ski/wakeboard pylon (if equipped)

Engine START/STOP button

Engine cut-off switch and the monitoring
beeper
Battery condition and connections
Sacrificial anodes
H H u u l l l l
Inspect hull for cracks and other
damages.
J J e e t t P P u u m m p p W W a a t t e e r r I I n n t t a a k k e e
Remove weeds, shells, debris or any-
thing else that could restrict the flow of
water and damage the propulsion unit.
Clean as necessary. If any obstruction
cannot be removed, refer to an au-
thorized Sea-Doo dealer for servicing.
48
1. Water intake
2. Ride plate
SAFETY INFORMATION
Check operation. (Depress and
release the lever to check for
freedom of movement. If any
friction is felt, the lever must be
taken apart, cleaned, inspected
for wear and lubricated)
Check operation. (Depress and
release the lever to check for
freedom of movement. If any
friction is felt, the lever must be
taken apart, cleaned, inspected
for wear and lubricated)
Ensure they are closed and
latched.
– Ensure rack is properly
installed and secured.
– Make sure bungee cords
are in good condition.
– Ensure wakeboard is
correctly installed in rack
and secured.
Inspect and check operation.
Check operation
Check operation
Check every month
Inspect every month (more
often in saltwater use) and
change if necessary