24
www.aeg.com
11.2 How to remove: Shelf
supports
Remove the shelf supports to clean the
oven.
Step 1
Step 2
Step 3
Step 4
11.3 How to use: Catalytic
cleaning
The cavity is coated with catalytic
enamel. It absorbs fat during catalysis.
Turn off the oven and wait
until it is cold.
Step 1
To clean the top oven
set the function:
To clean the main oven
set the function:
Turn off the oven and wait un‐
til it is cold.
Pull the front of the shelf sup‐
port away from the side wall.
Pull the rear end of the shelf
support away from the side
wall and remove it.
Install the shelf supports in
the opposite sequence.
The retaining pins on the tele‐
scopic runners must point to
the front.
Before the catalytic cleaning
Remove all accessories and
removable shelf supports.
Clean the oven with catalytic cleaning
Set the maximum
.
oven temperature.
Duration: 1 h
.
1
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Clean one oven at a time.
Step 2
After cleaning, turn
the knob for the
oven functions to
the off position.
2
Clean the oven floor and the
inner door glass with warm
water, soft cloth and mild de‐
tergent.
Step 3
When the oven is
cold, clean the cav‐
ity with a wet soft
Step 4
cloth.