Clock Functions - AEG DCK431110M User Manual

recommendations refer to "Energy
Efficiency" chapter, Energy Saving.

7. CLOCK FUNCTIONS

7.1 Clock functions
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
7.2 How to set: Clock functions
How to set: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a power
cut or when the timer is not set.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to change: Time of Day
Step 1
Step 2
How to set: Duration
Step 1
Step 2
Application
To set, change or check the time of day.
Only the top oven works without the set time.
To set how long the oven works.
The function works only for the main oven.
To set when the oven turns off.
The function works only for the main oven.
To combine functions: Duration and End Time.
The function works only for the main oven.
To set a countdown. This function has no effect on the op‐
eration of the oven. You can set this function at any time,
also when the oven is off.
- press repeatedly to change the time of day.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
Set an oven function and the temperature.
- press repeatedly. - starts to flash.
ENGLISH
- starts to flash.
11