Safety Characteristic Data - Pilz PNOZ X9 Operating Manual

PNOZ X9
Mechanical data
Conductor cross section
with screw terminals
1 core flexible
2 core with the same
cross section, flexible
with crimp connectors,
no plastic sleeve
2 core with the same
cross section, flexible
without crimp connect-
ors or with TWIN crimp
connectors
Torque setting with screw
terminals
Stripping length with
screw terminals
Dimensions
Height
Width
Depth
Weight
Where standards are undated, the 2020-07 latest editions shall apply.

Safety characteristic data

Operating EN ISO
mode 13849-1:
2015
PL
– PL e
Explanatory notes for the safety-related characteristic data:
}
The SIL CL value in accordance with EN 62061 corresponds to the SIL value in accord-
ance with EN 61508.
}
T is the maximum mission time in accordance with EN ISO 13849-1. The value also ap-
M
plies as the retest interval in accordance with EN 61508-6 and IEC 61511 and as the
proof test interval and mission time in accordance with EN 62061.
All the units used within a safety function must be considered when calculating the safety
characteristic data.
Operating Manual PNOZ X9
19526-EN-10
774605
0,2 - 4 mm², 24 - 10 AWG 0,2 - 4 mm², 24 - 10 AWG 0,2 - 4 mm², 24 - 10 AWG
0,2 - 2,5 mm², 24 - 14
AWG
0,2 - 2,5 mm², 24 - 14
AWG
0,6 Nm
8 mm
87 mm
90 mm
121 mm
750 g
NOTICE
You must comply with the safety characteristic data in order to achieve the
required safety level for your plant/machine.
EN ISO EN 62061
13849-1:
SIL CL
2015
Category
Cat. 4 SIL CL 3
774606
0,2 - 2,5 mm², 24 - 14
AWG
0,2 - 2,5 mm², 24 - 14
AWG
0,6 Nm
8 mm
87 mm
90 mm
121 mm
750 g
EN 62061 IEC 61511
PFH [1/h] SIL
D
2,31E-09 SIL 3
774609
0,2 - 2,5 mm², 24 - 14
AWG
0,2 - 2,5 mm², 24 - 14
AWG
0,6 Nm
8 mm
87 mm
90 mm
121 mm
750 g
IEC 61511 EN ISO
13849-1:
PFD
2015
T [year]
M
2,03E-06 20
| 22