Safety; Intended Use; Safety Regulations; Safety Assessment - Pilz PNOZ X9 Operating Manual

PNOZ X9

Safety

Intended use

The safety relay PNOZ X9 provides a safety-related interruption of a safety circuit.
The safety relay meets the requirements of EN 60947-5-1 and EN 60204-1 and may be
used in applications with:
} E-STOP pushbuttons
}
Safety gates
}
Light grids and safety switches with detection of shorts across contacts
The following is deemed improper use in particular
}
Any component, technical or electrical modification to the product,
}
Use of the product outside the areas described in this manual,
} Use of the product outside the technical details (see

Safety regulations

Safety assessment

Before using a device, a safety assessment in accordance with the Machinery Directive is
required.
The product as an individual component fulfils the functional safety requirements in accord-
ance with EN ISO 13849 and EN 62061. However, this does not guarantee the functional
safety of the overall plant/machine. To achieve the relevant safety level of the overall plant/
machine's required safety functions, each safety function needs to be considered separ-
ately.
Operating Manual PNOZ X9
19526-EN-10
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
Technical details [ 16]).
| 5