Serial Ports (UART)
Audio
Rear Audio
The system board is equipped with 2 audio jacks (Line-out and Mic-in). A jack is a one-hole connecting interface for inserting
a plug.
•
Line-out Jack (Lime)
This jack is used to connect a headphone or external speakers.
•
Mic-in Jack (Pink)
This jack is used to connect an external microphone.
BIOS Setting
Configure the onboard Audio device in the Chipset menu ("SB HD Azalia Configuration" submenu) of the BIOS.
I/O Connectors
Serial ATA (SATA) Connector
Features
•
1 Serial ATA 3.0 port with data transfer rate up to 6Gb/s
•
Integrated Advanced Host Controller Interface (AHCI) controller
The Serial ATA connector is used to connect the Serial ATA device. Connect one end of the Serial ATA data connector to a
SATA connector on the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drive in the Chipset menu ("SB SATA Configuration" submenu) of the BIOS. Refer to chapter 3 for
more information.
4
Serial
Pin
Connection
RS232
1
2
3
4
5
RS485
6
7
8
9
10
RXi – Panel PC Quick Start Guide
Function
TXD
RXD
RTS
CTS
GND
TX+
TX-
RX+
RX-
GND
GFK-3072D