Montigo RXM40VAC Installation & Maintenance Manual
Montigo RXM40VAC Installation & Maintenance Manual

Montigo RXM40VAC Installation & Maintenance Manual

On/off remote with 110v receiver

Advertisement

WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious injury,
death, or property damage.
— Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
— WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any
phone in your building.
• Leave the building immediately.
• Immediately call your gas supplier from a neighbour's
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
— Installation and service must be performed by a qualified
installer, service agency or the gas fitter.
Installation & Maintenance Manual
RXM40VAC
ON/OFF REMOTE WITH 110V RECEIVER
• The installation of this fireplace must be done by a
®
• Check local codes and read all instructions prior to
C
US
qualified and certified gas appliance installer.
installation.
NOTICE
Installer: Leave this manual with the appliance.
Consumer: Retain this manual for future reference.
CAUTION
Installation and service must be performed by a qualified installer,
service agency or the gas fitter.
DANGER
Read and understand this manual. Improper installation, adjustment,
alteration, service or maintenance can cause serious injury, property
damage or even death. For assistance or additional information
consult a qualified installer, service agency or the gas supplier.
WARNING
Some materials used in the manufacturing process of this product can
expose you to Benzene which is known in the State of California to
cause cancer and birth defects or other reproductive harm. For more
information go to www.P65warnings.ca.gov
XG0679 - 080321

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RXM40VAC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Montigo RXM40VAC

  • Page 1 Installation & Maintenance Manual RXM40VAC ON/OFF REMOTE WITH 110V RECEIVER • The installation of this fireplace must be done by a qualified and certified gas appliance installer. ® • Check local codes and read all instructions prior to installation. NOTICE WARNING: FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly could result in serious injury, Installer: Leave this manual with the appliance.
  • Page 2: Safety Alert Key

    • Check to ensure that all components required for installation are • The remote receiver can be placed close to the electrical control box included in your package. • This remote control system can be used for the Montigo Exemplar MODEL: 1410-A LEARNING TRANSMITTER TO RECEIVER Series fireplaces (excluding the R324STIO), as well as the H36PV.
  • Page 3: Wiring Instructions

    General WARNING This remote control system must be installed exactly as outlined in these instructions. Read all instructions completely before attempting installation. Follow instructions carefully during installation. Any modifications of this remote control or any of its components will void the warranty and may pose a fire hazard.
  • Page 4: Troubleshooting

    General LEARNING TRANSMITTER TO RECEIVER Each transmitter uses a unique security code. It will be necessary to press the LEARN button on the receiver to accept the transmitter security code upon initial use, if batteries are replaced, or if a replacement transmitter is purchased from your dealer or the factory.
  • Page 5 Notes XG0783 - 021121...
  • Page 6 Installation & Maintenance Manual RXM40VAC RXM40VAC ON/OFF Remote with 110v receiver ON/OFF Remote with 110v receiver XG0679 - 080321...

Table of Contents