Omnitron Systems Technology OmniConverter 10GPoE+/M Quick Start Manual

Omnitron Systems Technology OmniConverter 10GPoE+/M Quick Start Manual

Managed 6 and 10 port poe/poe+ 10gigabit ethernet switch

Advertisement

Quick Links

OmniConverter
Managed 6 and 10 Port
PoE/PoE+ 10Gigabit Ethernet Switch
Quick Start Guide
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
10GPoE+/M
®
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, iConverter
TM
TM
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
the Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This network product and the included AC/DC power adapter are warranted to the
original purchaser (Buyer) against defects in material and workmanship for a period
of two (2) years from the date of shipment. The warranty for the network product
(excluding the AC/DC power adapter) can be extended to five (5) years by registering
the product at www.omnitron-systems.com/support within ninety (90) days from the
date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product
to Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
®
and
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OmniConverter 10GPoE+/M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Omnitron Systems Technology OmniConverter 10GPoE+/M

  • Page 1 10GPoE+/M ® The information contained in this publication is subject to change without notice. Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors. Managed 6 and 10 Port Warranty This network product and the included AC/DC power adapter are warranted to the...
  • Page 2: Product Overview

    Directive) of the European Community directive 2012/19/EU on waste electrical and electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/ The OmniConverter 10GPoE+/M are compact PoE/PoE+ 10Gigabit Ethernet switches EU, for electrical and electronic equipment sold in the EU after July 2019. Such...
  • Page 3: Installation Procedure

    The table below provides a description of each DIP-switch position and function. Serial Console Port To configure the module using the serial port, attach a DB-9 serial (RS-232) Switch Position Legend Function equipped computer with terminal emulation software such as Procomm or Putty DOWN Single Switch to the serial port on the module using a RJ-45 to DB-9 serial cable (not included).
  • Page 4 Directed Switch Mode Dual Uplink Port Dual Device with Directed Switch Mode When configured for Directed Switch Mode and Uplink Redundancy (per DIP- SW3 and SW4: Uplink Redundancy switches 3 and 4), traffic is forwarded to both the primary and secondary uplink The modes are described with MAC learning enabled.
  • Page 5: Installing The Module

    SW6: Pause - “Pause Off/On” 3) Apply Power Setting the DIP-switch to the DOWN “Pause Off” position (factory default) configures AC Power the module to advertise no Pause capability on all ports. Setting this DIP-switch to the Secure the ground wire to the ground screw. See the figure below for the location UP “On”...
  • Page 6 The over current protection for connection with centralized DC shall be provided in the building installation, and shall be a UL listed circuit breaker rated 20 Amps, and installed per the National Electrical Code, ANSI/NFPA-70. The 6 Port 10GPoE+/M requires +46 to +57VDC (2.33A @ 56VDC max rated power).
  • Page 7: Verify Operation

    TX wavelength must match the RX wavelength at the other end and the RX RJ-45 User Ports wavelength must match the TX wavelength at the other end. LED Indicators Connect the Ethernet 10/100/1000 RJ-45 port using a Category 5 or better Legend Indicator Description...
  • Page 8: Specifications

    Fax: (949) 250-6514 Module with AC/DC Adapter: Module with AC/DC Adapter: 3.7 lbs. (1703 grams) 3.8 lbs. (1723 grams) Address: Omnitron Systems Technology, Inc. Commercial: 0 to 50°C 38 Tesla Operating Temperature Wide: -40 to 60°C (-20°C AC cold start)

This manual is also suitable for:

9580-0-24-pt9580-0-28-pt

Table of Contents