Omnitron Systems Technology RuggedNet 10GPoE+/Si User Manual

Unmanaged 6 and 10 port poe/poe+ 10gigabit ethernet switch

Advertisement

Quick Links

RuggedNet
®
Unmanaged 6 and 10 Port
PoE/PoE+ 10Gigabit Ethernet Switch
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
10GPoE+/Si
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, iConverter
TM
TM
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
the Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This product is warranted to the original purchaser (Buyer) against defects in
material and workmanship for a period of two (2) years from the date of shipment.
A five (5) year warranty may be obtained by the original purchaser by registering
this product at www.omnitron-systems.com/support within ninety (90) days from the
date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product
to Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
®
and
TM

Advertisement

Table of Contents
loading

Summary of Contents for Omnitron Systems Technology RuggedNet 10GPoE+/Si

  • Page 1 10GPoE+/Si ® The information contained in this publication is subject to change without notice. Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors. Unmanaged 6 and 10 Port Warranty This product is warranted to the original purchaser (Buyer) against defects in PoE/PoE+ 10Gigabit Ethernet Switch material and workmanship for a period of two (2) years from the date of shipment.
  • Page 2: Product Overview

    Directive) of the European Community directive 2012/19/EU on waste electrical and electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/ The RuggedNet 10GPoE+/Si is a ruggedized unmanaged PoE and PoE+ industrial EU, for electrical and electronic equipment sold in the EU after July 2019. Such...
  • Page 3: Installation Procedure

    Reset Button The table below provides a description of each DIP-switch position and function. A reset button is available on the front of the switch to restore the switch to factory Switch Position Legend Function default values and clear buffers and memory. Press and hold the reset button for LEFT Single Switch more than 5 seconds to restore the switch to factory default values.
  • Page 4 port F1 and ports P3 and P4 are only forwarded to uplink port F2. When models with 8 RJ-45 user ports are configured for Dual Device Mode and Directed Switch Mode, the traffic from ports P1 - P4 is only forwarded to uplink port F1 and ports P5 - P8 are only forwarded to uplink port F2.
  • Page 5: Installing The Module

    2) Installing the Module The module will return to the primary Port F1 after the failure condition has been restored for 6 seconds. The module can be wall or rack mounted using the optional Wall Mount Plate SW5: MAC Learning - “MAC Learning/Off” (8260-3).
  • Page 6: Connect Cables

    WARNING REGARDING EARTHING GROUND: This equipment shall be connected to the DC supply system earthing electrode conductor or to a bonding jumper from an earthing terminal bar or bus to which the DC supply system earthing electrode is connected. This equipment shall be located in the same immediate Power Options area (such as adjacent cabinets) as any other equipment that has a connection between the earthed conductor of...
  • Page 7: Verify Operation

    RJ-45 User Ports Description IEEE 802.3af PoE IEEE 802.3at PoE+ LED Indicators Power Supply Voltage Range 46.0 to 57.0 VDC 51.0 to 57.0 VDC Legend Indicator Description Voltage Range at PSE port Output 44.0 to 56.0 VDC 50.0 to 56.0 VDC No link Maximum Power from PoE/PSE port 15.4 watts...
  • Page 8: Specifications

    (949) 250-6510 Environmental REACH, RoHS and WEEE Fax: (949) 250-6514 PoE Modes IEEE Alternate A (Alt A) Address: Omnitron Systems Technology, Inc. Frame Size Up to 10,240 bytes 38 Tesla Copper: 10/100/1000BASE-T (RJ-45) Irvine, CA 92618, USA SFP/SFP+: 10GBASE-X Fiber Transceivers...

This manual is also suitable for:

9583-0-24-2z9583-0-28-2z

Table of Contents