Omnitron Systems Technology OmniConverter 10GPoE+/Sx User Manual

Unmanaged 6 and 10 port poe/poe+ 10gigabit ethernet switch

Advertisement

Quick Links

OmniConverter
Unmanaged 6 and 10 Port
PoE/PoE+ 10Gigabit Ethernet Switch
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
10GPoE+/Sx
®
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, iConverter
TM
TM
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
the Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This network product and the included AC/DC power adapter are warranted to the
original purchaser (Buyer) against defects in material and workmanship for a period
of two (2) years from the date of shipment. The warranty for the network product
(excluding the AC/DC power adapter) can be extended to five (5) years by registering
the product at www.omnitron-systems.com/support within ninety (90) days from the
date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product
to Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
®
and
TM

Advertisement

Table of Contents
loading

Summary of Contents for Omnitron Systems Technology OmniConverter 10GPoE+/Sx

  • Page 1 10GPoE+/Sx ® The information contained in this publication is subject to change without notice. Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors. Unmanaged 6 and 10 Port Warranty This network product and the included AC/DC power adapter are warranted to the...
  • Page 2: Product Overview

    Directive) of the European Community directive 2012/19/EU on waste electrical and electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/ The OmniConverter 10GPoE+/Sx are compact PoE/PoE+ 10Gigabit Ethernet switches EU, for electrical and electronic equipment sold in the EU after July 2019. Such...
  • Page 3: Installation Procedure

    SW1 and SW2: Mode of Operation Installation Procedure The module supports Switch, Directed Switch and Dual Device mode. 1) Configure DIP-switches The modes are described with MAC learning enabled. When MAC learning is 2) Installing the Module disabled, unicast packets are forwarded to all ports. 3) Apply Power Function 4) Connect Cables...
  • Page 4 Function DOWN DOWN Switch Mode (factory default) DOWN Switch Mode (factory default) DOWN Redundant Mode - no return to primary (F1) Redundant Mode - return to primary (F1) Uplink Redundancy When configured for Uplink Redundant Mode “no return to primary”, the uplink ports operate as redundant links.
  • Page 5: Installing The Module

    SW8: PSE Reset - “Off/PoE Reset” The module can be configured to disable (reset) the PoE output power for 5 seconds after a loss of receive link on any uplink port. This feature is typically used to allow a PD to re-initialize after a failure on the incoming uplink. When this DIP-switch is in the DOWN “Off”...
  • Page 6 Power Options WARNING: Note the wire colors used in making the positive, negative and ground connections. Use the same color assignment for the connection at DC Models Rear View: 2-Pin Terminal for DC Power the circuit breaker. Connect the power wires to the circuit breaker and switch the circuit breaker ON. WARNING: Only a DC power source that complies with If any module are installed, the Power LED will indicate the presence of power.
  • Page 7: Verify Operation

    RJ-45 User Ports Description IEEE 802.3af PoE IEEE 802.3at PoE+ LED Indicators Power Supply Voltage Range 46.0 to 57.0 VDC 51.0 to 57.0 VDC Legend Indicator Description Voltage Range at PSE port Output 44.0 to 56.0 VDC 50.0 to 56.0 VDC No link Maximum Power from PoE/PSE port 15.4 watts...
  • Page 8: Specifications

    Fax: (949) 250-6514 (See Temperature Derating Extended: -40 to 75°C - not available for models with Table) AC/DC Adapters Address: Omnitron Systems Technology, Inc. Storage: -40 to 80°C 38 Tesla Humidity 5 to 95% (non-condensing) Irvine, CA 92618, USA Altitude...

This manual is also suitable for:

9581-0-24-pt9581-0-28-pt

Table of Contents