Omnitron Systems Technology OmniConverter 10GPoEBT/M Quick Start Manual

Omnitron Systems Technology OmniConverter 10GPoEBT/M Quick Start Manual

Managed 6-port 60/100w ieee 802.3bt 10gigabit ethernet switches

Advertisement

Quick Links

OmniConverter
10GPoEBT/M
®
Managed 6-Port
60/100W IEEE 802.3bt
10Gigabit Ethernet Switches
Quick Start Guide
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, iConverter
TM
TM
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
the Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This network product and the included AC/DC power adapter are warranted to the
original purchaser (Buyer) against defects in material and workmanship for a period
of two (2) years from the date of shipment. The warranty for the network product
(excluding the AC/DC power adapter) can be extended to five (5) years by registering
the product at www.omnitron-systems.com/support within ninety (90) days from the
date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product
to Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
®
and
TM

Advertisement

Table of Contents
loading

Summary of Contents for Omnitron Systems Technology OmniConverter 10GPoEBT/M

  • Page 1 10GPoEBT/M ® The information contained in this publication is subject to change without notice. Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors. Managed 6-Port Warranty This network product and the included AC/DC power adapter are warranted to the 60/100W IEEE 802.3bt...
  • Page 2: Product Overview

    Directive) of the European Community directive 2012/19/EU on waste electrical and electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/ The OmniConverter 10GPoEBT/M is a compact High-Power PoE Ethernet switch that EU, for electrical and electronic equipment sold in the EU after July 2019. Such...
  • Page 3: Serial Console Port

    Front Panel Layout Serial Console Port DIP-switch Bank Locations To configure the module using the serial port, attach a DB-9 serial (RS-232) equipped computer with terminal emulation software such as Procomm or Putty The table below provides a description of each DIP-switch position and function. to the serial port on the module using a RJ-45 to DB-9 serial cable (not included).
  • Page 4: Switch Mode

    Switch Mode forwarded to uplink port F2. This prevents broadcast traffic from flooding other network ports. Incoming traffic from F1 and F2 follows MAC address mapping. When configured for Switch Mode (factory default), the module operates as a standard layer 2 switch. Data flow will follow MAC address mapping. Directed Switch Mode When configured for Directed Switch Mode, traffic from ports P1 - P4 is only forwarded to uplink port F1, preventing the broadcast traffic from flooding other...
  • Page 5: Installing The Module

    store the address so packets destined for the stored addresses can be forwarded to Rack Mounting the appropriate port on the module. When the DIP-switch is in the UP “Off” position, The module can be rack mounted using the optional Rack Mount Shelf (8260-0). learning is turned off and all received unicast packets are forwarded to all ports.
  • Page 6 Appropriate overloading protection should be provided on the DC power source WARNING: The positive lead of the power source must be connected to the outlets utilized. “+” terminal on the module and the negative lead of the power source to the “-“...
  • Page 7: Verify Operation

    RJ-45 User Ports 100W LED Indicators Description IEEE 802.3af IEEE 802.3at IEEE 802.3.bt IEEE 802.3bt PoE+ PoE (Type 3) PoE (Type 4) Legend Indicator Description Power Supply Voltage 46.0 to 57.0 VDC 51.0 to 57.0 VDC 51.0 to 57.0 VDC 53.0 to 57.0 VDC No link Range Green - ON...
  • Page 8: Specifications

    Module Only: 1.6 lbs. (735 grams) Weight Fax: (949) 250-6514 Module with AC/DC Adapter: 3.7 lbs. (1703 grams) Address: Omnitron Systems Technology, Inc. Commercial: 0 to 50°C Operating Temperature Wide: -40 to 60°C (-20°C AC cold start) 38 Tesla (See Temperature Derating Extended: -40 to 75°C - not available for models with...

Table of Contents